The 3-segment input/6-segment output digital signal processor provides precise and extensive control of audio. The function buttons on the front panel interface allow quick transmission of all control parameters and eliminate hidden submenus.

Backlit 2x20 features LCD display channel and function settings. Related buttons provide access to all audio features and system tools.

Faster setup and powerful visual I/O routing, EQ, filter curve system,

Two USB ports and an RS-232 interface are available for control software and PC connectivity.

A 6-foot USB-A to USB-B cable is provided.

The software includes very powerful preset capabilities (can store up to 30 presets) and is very intuitive in terms of audio routing and control processing.

Using advanced DSP technology, from a 24-bit, 48kHz delta-sigmaA/D converter with 128x oversampling.

Digital processing includes: gain, polarity switching, parametric equalizer scaffolding filters, time delay, crossover, compression, limiting, and signal routing, all processed through a pair of 120MHz high performance DSP processors.

The D/A converter uses a 24-bit delta-sigma converter with 128 times oversampling.

All inputs and outputs are balanced XLR interfaces that protect against RF interference.

It can adjust the gain, delay or 6-band equalization of each input channel. Before setting the crossover point, the signal can be routed inside the DSP. The signals of two or more input channels can be mixed and routed to the output channel. ,

In the output channel, modules such as 4-band equalization, delay, gain, inverting or compressor can be used.

One rack space

3 inputs, 6 outputs

Intuitive user interface

With frequency division, equalization, delay and limit function

Input can be assigned to any output

Superior sound quality

Controlled by front panel or PC design

USB and RS-232 interface

Third party control

XLR audio signal connector

Balanced input and output

Control feedback through parametric equalization and compression limiting

With Linkwitz-Riley, Bessel and Butterworth filters

Filter slopes are 12, 18, 24 and 48 dB/octave, respectively

Parametric EQ: 1/64th to 4th octave range

682 millisecond input and output delay

Limiter for each output

Independent input and output headers

Level 4 protection

Application:

Traditional PA system, main sound reinforcement system, monitoring system, ultra-low auxiliary supply function, L-C-R configuration, multi-zone sound reinforcement system