The digital control and sound signals of the main control unit and the conference system unit are transmitted by the same cable (eight core)

Can be operated independently or external computer combined with software synchronization linkage operation

The system has high quality sound effects

With the function of limiting the number of delegates, the system has several working modes of “1/2/3/5/full open” for selection.

Built-in 2x50w amplifier with high and low sound adjustment

With chairman mode selection function: you can choose the chairperson/chairman

A single host has four sets of main terminals that can connect more than 60 groups of conference units. It has load and short circuit protection. increase

Extended device for simultaneous use of 250 conference units

A set of audio signal input terminals. Can be connected to a CD player and other audio input devices

With a set of MIC input terminals, you can externally hold signals such as MIC and wireless MIC

3 sets of audio signal output terminals for external recording or ringing equipment

Frequency response: 100Hz-18KHz: Total harmonic distortion: The sound output of the conference system is less than 0.1% at 100Hz-18KHz

Built-in 1.5W monitor speaker and volume adjustment

Power consumption: 500W, powered by AC220V

Can be installed in a 19-inch standard cabinet

In line with international conference identification and international installation standards UL, CE certification, through the national CCC safety certification